24f72f61a9
sunxi: update defconfigs for Lichee Pi Zero for SPI
...
Signed-off-by: Icenowy Zheng <icenowy@aosc.io >
2017-05-21 13:44:08 +08:00
a297a99445
sunxi: enable fdt overlay in lcd-less Lichee Pi Zero defconfig
...
Signed-off-by: Icenowy Zheng <icenowy@aosc.io >
2017-05-20 23:43:46 +08:00
cd94d29394
add Lichee Pi Zero with LCD defconfig's
...
Signed-off-by: Icenowy Zheng <icenowy@aosc.io >
2017-04-13 23:41:01 +08:00
7557c42cde
sunxi: add support for Lichee Pi Zero
...
Lichee Pi Zero is a development board with a V3s SoC.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz >
2017-01-14 03:17:13 +08:00
7ceae0eac0
Merge branch 'master' of git://git.denx.de/u-boot-spi
2016-12-23 18:41:32 -05:00
9e26834f49
configs: enable the DM_PMIC and DM_I2C_GPIO for max8998 pmic
...
Enable the DM_PMIC and DM_I2C_GPIO for using max8998 pmic.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com >
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com >
2016-12-22 13:34:02 +09:00
cb71c6d854
spi: Zap armada100_spi.c and env
...
armada100_spi.c and related env is zapping becuase
of "no DM conversion".
Cc: Ajay Bhargav <ajay.bhargav@einfochips.com >
Signed-off-by: Jagan Teki <jagan@openedev.com >
2016-12-21 12:18:47 +01:00
353f6a770f
spi: Zap mpc52xx_spi.c, config and related code
...
armada100_spi.c, related config options and related codes
are zapping becuase of "no DM conversion".
Cc: Werner Pfister <Pfister_Werner@intercontrol.de >
Signed-off-by: Jagan Teki <jagan@openedev.com >
Reviewed-by: Tom Rini <trini@konsulko.com >
2016-12-21 12:14:37 +01:00
49c4c78e70
block: Move ceva driver to DM
...
This patch also includes ARM64 zynqmp changes:
- Remove platform non DM initialization
- Remove hardcoded sata base address
Signed-off-by: Michal Simek <michal.simek@xilinx.com >
Reviewed-by: Simon Glass <sjg@chromium.org >
2016-12-20 09:15:27 +01:00
854bb75be9
imx6: icorem6_rqs: Add FEC support
...
Add FEC support for Engicam i.CoreM6 RQS modules.
Cc: Stefano Babic <sbabic@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 18:39:06 +01:00
bd363f80e4
imx6: geam6ul: Add FEC support
...
Add FEC support for Engicam GEAM6UL module.
Cc: Stefano Babic <sbabic@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 18:39:05 +01:00
dca7c2878a
imx6: icorem6_rqs: Add I2C support
...
Add I2C support for Engicam i.CoreM6 RQS modules.
icorem6qdl-rqs> i2c bus
Bus 0: i2c@021a0000
Bus 1: i2c@021a4000
Bus 2: i2c@021a8000
icorem6qdl-rqs> i2c dev 0
Setting bus to 0
icorem6qdl-rqs> i2c speed 100000
Setting bus speed to 100000 Hz
icorem6qdl-rqs> i2c probe
Valid chip addresses: 4F
icorem6qdl-rqs> i2c md 4F 0xff
00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
icorem6qdl-rqs> i2c bus
Bus 0: i2c@021a0000 (active 0)
4f: generic_4f, offset len 1, flags 0
Bus 1: i2c@021a4000
Bus 2: i2c@021a8000
Cc: Stefano Babic <sbabic@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 18:39:05 +01:00
5bdf6b574a
imx6: icorem6: Rename engicam icorem6 defconfig files
...
Rename defconfig files for better compatible with
respective board names and dts files.
Cc: Stefano Babic <sbabic@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 18:38:54 +01:00
6121a54d60
arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support
...
Boot from MMC:
-------------
U-Boot SPL 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:56:07)
Trying to boot from MMC1
U-Boot 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:56:07 +0530)
CPU: Freescale i.MX6DL rev1.3 at 792 MHz
Reset cause: POR
Model: Engicam i.CoreM6 DualLite/Solo RQS Starter Kit
DRAM: 512 MiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot: 0
icorem6qdl-rqs>
Cc: Stefano Babic <sbabic@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 17:16:10 +01:00
871ec6da42
arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support
...
Boot from MMC:
-------------
U-Boot SPL 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:59:44)
Trying to boot from MMC1
U-Boot 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:59:44 +0530)
CPU: Freescale i.MX6D rev1.2 at 792 MHz
Reset cause: POR
Model: Engicam i.CoreM6 Quad/Dual RQS Starter Kit
DRAM: 512 MiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot: 0
icorem6qdl-rqs>
Cc: Stefano Babic <sbabic@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 17:16:10 +01:00
084cbb6048
imx6: geam6ul: Add NAND support
...
Add NAND support for Engicam GEAM6UL board.
Boot Log:
--------
U-Boot SPL 2016.11-g537fa5f (Nov 28 2016 - 11:42:28)
Trying to boot from NAND
NAND : 256 MiB
U-Boot 2016.11-g537fa5f (Nov 28 2016 - 11:20:06 +0100)
CPU: Freescale i.MX6UL rev1.1 69 MHz (running at 396 MHz)
CPU: Automotive temperature grade (-40C to 125C) at 42C
Reset cause: WDOG
Model: Engicam GEAM6UL
DRAM: 128 MiB
NAND: 256 MiB
MMC: FSL_SDHC: 0
* Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
Cc: Stefano Babic <sbabic@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 17:16:10 +01:00
d31373c4ac
imx6: geam6ul: Add I2C support
...
Add I2C support for Engicam GEAM6UL module.
geam6ul> i2c bus
Bus 0: i2c@021a0000
Bus 1: i2c@021a4000
geam6ul> i2c dev 0
Setting bus to 0
geam6ul> i2c dev
Current bus is 0
geam6ul> i2c speed 100000
Setting bus speed to 100000 Hz
geam6ul> i2c probe
Valid chip addresses: 2C
geam6ul> i2c md 2C 0xff
00ff: 00 00 00 00 0f f0 01 64 ff ff 00 00 00 00 00 00 .......d........
Cc: Stefano Babic <sbabic@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 17:16:10 +01:00
a5b9f8c8f0
arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
...
Boot Log:
--------
U-Boot SPL 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30)
Trying to boot from MMC1
U-Boot 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30 +0530)
CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 43C
Reset cause: POR
Model: Engicam GEAM6UL
DRAM: 128 MiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot: 0
geam6ul>
Cc: Stefano Babic <sbabic@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 17:16:10 +01:00
d90384e834
imx6: icorem6: Add I2C support
...
Add I2C support for Engicam i.CoreM6 qdl board.
icorem6qdl> i2c bus
Bus 0: i2c@021a0000
Bus 1: i2c@021a4000
Bus 2: i2c@021a8000
icorem6qdl> i2c dev 2
Setting bus to 2
icorem6qdl> i2c speed 100000
Setting bus speed to 100000 Hz
icorem6qdl> i2c probe
Valid chip addresses: 2C
icorem6qdl> i2c md 2C 0xff
00ff: 00 00 00 00 0f f0 01 64 ff ff 00 00 00 00 00 00 .......d........
Cc: Stefano Babic <sbabic@denx.de >
Cc: Heiko Schocher <hs@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
Acked-by: Heiko Schocher <hs@denx.de >
2016-12-16 17:15:27 +01:00
ca7463c9d7
imx6: icorem6: Add framebuffer support
...
Add IPUv3 framebuffer support for Engicam i.CoreM6 qdl board.
Cc: Anatolij Gustschin <agust@denx.de >
Cc: Stefano Babic <sbabic@denx.de >
Cc: Matteo Lisi <matteo.lisi@engicam.com >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 17:15:27 +01:00
e920f60779
icorem6: Use CONFIG_DM_ETH support
...
Use CONFIG_DM_ETH and remove board_eth_init code
from board files.
Cc: Joe Hershberger <joe.hershberger@ni.com >
Cc: Peng Fan <peng.fan@nxp.com >
Cc: Stefano Babic <sbabic@denx.de >
Cc: Michael Trimarchi <michael@amarulasolutions.com >
Acked-by: Joe Hershberger <joe.hershberger@ni.com >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
2016-12-16 17:15:27 +01:00
98d62e618b
arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
...
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com >
2016-12-16 12:57:12 +01:00
8e1d92fdbc
imx: mx6sllevk: add plugin support
...
Add plugin support for mx6sllevk board.
Signed-off-by: Peng Fan <peng.fan@nxp.com >
Cc: Stefano Babic <sbabic@denx.de >
2016-12-16 11:38:24 +01:00
47f73504d8
arm: imx: add i.MX6SLL EVK board support
...
Add i.MX6SLL EVK board support.
1. Add imx6sll-evk device tree.
2. Enable SDHC/I2C/UART.
3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver.
Boot Log:
U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800)
CPU: Freescale i.MX6SLL rev1.0 at 792MHz
CPU: Commercial temperature grade (0C to 95C)Reset cause: POR
Model: Freescale i.MX6SLL EVK Board
Board: MX6SLL EVK
DRAM: 2 GiB
i2c bus 0 at 35258368, no gpio pinctrl state.
PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
In: serial
Out: serial
Err: serial
Net: CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <peng.fan@nxp.com >
Cc: Stefano Babic <sbabic@denx.de >
2016-12-16 11:38:24 +01:00
c9e40e65e1
board/liteboard: Add support for liteBoard
...
liteBoard is a development board which uses liteSOM as its base.
Hardware specification:
* liteSOM (i.MX6UL, DRAM, eMMC)
* Ethernet PHY (id 0)
* USB host (usb_otg1)
* MicroSD slot (uSDHC1)
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com >
2016-12-16 10:31:13 +01:00
a11e30f8c8
udoo_neo: Add Ethernet support
...
UDOO Neo boards has one FEC port connected to KSZ8091, add support for it.
Tested on a UDOO Neo Full with "dhcp zImage" command.
Signed-off-by: Breno Lima <breno.lima@nxp.com >
2016-12-16 10:21:29 +01:00
4a056c4504
udoo_neo: Move MX6SX configuration to Kconfig
...
It's not necessary to define the processor in the defconfig file.
The preferred method to select the SoC is via Kconfig file.
Signed-off-by: Breno Lima <breno.lima@nxp.com >
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com >
2016-12-16 10:20:10 +01:00
a02d517b01
arm: imx: initial support for colibri imx6
...
This adds board support for the Toradex module family Colibri iMX6.
The familiy consists of a module with i.MX6 DualLite, i.MX6 Solo, both
with a version for commercial and industrial temperature range.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com >
2016-12-16 10:03:43 +01:00
592f4aed6d
arm: imx: initial support for apalis imx6
...
This adds board support for the Toradex module family Apalis iMX6.
The familiy consists of a module with i.MX6 Dual, i.MX6 Quad with
commercial and industrial temperature range.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com >
2016-12-16 10:02:45 +01:00
b591730c35
Merge git://www.denx.de/git/u-boot-marvell
2016-12-12 07:19:28 -05:00
fe9822556e
Merge branch 'master' of git://git.denx.de/u-boot-uniphier
2016-12-12 07:18:53 -05:00
a20b7a2a53
arm64: mvebu: Enable hush parser in A8K default configuration
...
Enable hush parser in Armada-7040 and Armada-8040 DB default
configurations.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com >
Cc: Stefan Roese <sr@denx.de >
Cc: Nadav Haklai <nadavh@marvell.com >
Cc: Neta Zur Hershkovits <neta@marvell.com >
Cc: Omri Itach <omrii@marvell.com >
Cc: Igal Liberman <igall@marvell.com >
Cc: Haim Boot <hayim@marvell.com >
Cc: Hanna Hawa <hannah@marvell.com >
Signed-off-by: Stefan Roese <sr@denx.de >
2016-12-12 09:05:45 +01:00
1d136726f7
arm64: mvebu: Enable PCIe support in Armada-7040 configuration
...
Enable PCIe bus support in Armada-7040 DB default configuration
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com >
Cc: Stefan Roese <sr@denx.de >
Cc: Nadav Haklai <nadavh@marvell.com >
Cc: Neta Zur Hershkovits <neta@marvell.com >
Cc: Omri Itach <omrii@marvell.com >
Cc: Igal Liberman <igall@marvell.com >
Cc: Haim Boot <hayim@marvell.com >
Cc: Hanna Hawa <hannah@marvell.com >
Signed-off-by: Stefan Roese <sr@denx.de >
2016-12-12 09:05:36 +01:00
81647eaff3
arm64: mvebu: Enable pin control support in A8K default config
...
Enable mvebu pin control support in the default configuration
files for Armada-7040 and Armada-8040 development boards
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com >
Cc: Stefan Roese <sr@denx.de >
Cc: Nadav Haklai <nadavh@marvell.com >
Cc: Neta Zur Hershkovits <neta@marvell.com >
Cc: Omri Itach <omrii@marvell.com >
Cc: Igal Liberman <igall@marvell.com >
Cc: Haim Boot <hayim@marvell.com >
Cc: Hanna Hawa <hannah@marvell.com >
Signed-off-by: Stefan Roese <sr@denx.de >
2016-12-12 09:04:52 +01:00
27bd4b159a
arm64: mvebu: Enable BUBT command support in A8K default config
...
Enable mvebu "bubt" command support in the default configuration
file for Armada-7040 and Armada-8040 development boards
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com >
Cc: Stefan Roese <sr@denx.de >
Cc: Nadav Haklai <nadavh@marvell.com >
Cc: Neta Zur Hershkovits <neta@marvell.com >
Cc: Omri Itach <omrii@marvell.com >
Cc: Igal Liberman <igall@marvell.com >
Cc: Haim Boot <hayim@marvell.com >
Cc: Hanna Hawa <hannah@marvell.com >
Signed-off-by: Stefan Roese <sr@denx.de >
2016-12-12 09:04:52 +01:00
2411e0fbd9
ARM: uniphier: disable CONFIG_ARCH_FIXUP_FDT_MEMORY
...
Do not overwrite the memory nodes in the kernel DT where some parts
of the memory region might be carved out.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com >
2016-12-10 01:42:51 +09:00
963ed6f323
davinci: omapl138_lcdk: boot from zImage
...
Stop booting legacy uImage and now boot zImage.
Signed-off-by: Fabien Parent <fparent@baylibre.com >
Reviewed-by: Tom Rini <trini@konsulko.com >
2016-12-09 08:40:23 -05:00
1c9021d622
defconfigs: am57xx_hs_evm: Add default OPTEE load address
...
Currently we let U-Boot find a spot at the end of DRAM at runtime, this
forces us to build an OPTEE image based on the size of DRAM for an EVM.
Add a default address that works across all current AM57xx EVMs.
Signed-off-by: Andrew F. Davis <afd@ti.com >
Reviewed-by: Tom Rini <trini@konsulko.com >
2016-12-09 08:40:22 -05:00
e3e3c633b6
defconfigs: dra7xx_hs_evm: Add default OPTEE load address
...
Currently we let U-Boot find a spot at the end of DRAM at runtime, this
forces us to build an OPTEE image based on the size of DRAM for an EVM.
Add a default address that works across all current DRA7xx EVMs.
Signed-off-by: Andrew F. Davis <afd@ti.com >
Reviewed-by: Tom Rini <trini@konsulko.com >
2016-12-09 08:40:21 -05:00
97857742f1
configs: omap5_uevm_defconfig: Enable LPAE mode
...
Enable Linear Physical Address Extension mode which is a
prerequisite for hypervisor mode.
Signed-off-by: Keerthy <j-keerthy@ti.com >
Reviewed-by: Tom Rini <trini@konsulko.com >
2016-12-09 08:39:11 -05:00
361a879902
Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"
...
This reverts commit 3edc0c2522bb135a0180
2016-12-09 07:56:54 -05:00
3edc0c2522
Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
2016-12-09 07:10:39 -05:00
3fd4de8840
travis-ci: Add zynq_zc702 target support
...
Signed-off-by: Michal Simek <michal.simek@xilinx.com >
Use embded option because of qemu
Use my repo till Stephen merge it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com >
2016-12-08 09:23:48 +01:00
8814c03853
block: Move ceva driver to DM
...
This patch also includes ARM64 zynqmp changes:
- Remove platform non DM initialization
- Remove hardcoded sata base address
Signed-off-by: Michal Simek <michal.simek@xilinx.com >
Reviewed-by: Simon Glass <sjg@chromium.org >
Series-to: sjg, agraf@suse.de
Series-cc: uboot
Series-version: 4
Series-changes: 2
- make ceva_init_sata static
- Move SATA_CEVA to defconfig
- Initalized max_lun and max_id platdata
Series-changes: 3
- Extend Kconfig help description
- sort dm.h
- Remove SPL undefinition from board file
- Fix Kconfig dependecies
2016-12-08 09:23:48 +01:00
e9c847c363
socfpga: add support for Terasic DE1-SoC board
...
Add CycloneV based Terasic DE1-SoC board. The board boots
from SD/MMC. Ethernet and USB host is supported.
Signed-off-by: Anatolij Gustschin <agust@denx.de >
Cc: Marek Vasut <marex@denx.de >
2016-12-06 01:45:56 +01:00
bf50ac918b
Merge git://git.denx.de/u-boot-fsl-qoriq
2016-12-05 17:00:23 -05:00
dd2ad2f131
armv8: QSPI: Add AHB bus 16MB+ size support
...
The default configuration for QSPI AHB bus can't support 16MB+.
But some flash on NXP layerscape board are more than 16MB.
Signed-off-by: Yuan Yao <yao.yuan@nxp.com >
Reviewed-by: York Sun <york.sun@nxp.com >
2016-12-05 08:32:43 -08:00
ea43683b13
Merge git://www.denx.de/git/u-boot-i2c
2016-12-05 11:02:01 -05:00
1ec5aa630a
arm64: mvebu: Add PCI support to DB-88F8040 board
...
This patch adds PCI support to the Marvell Armada-8K devel board.
Additionally the Intel E1000 ethernet driver is enabled so that
network support is available on this board, even without the
internal network interfaces being supported (yet).
Signed-off-by: Stefan Roese <sr@denx.de >
Cc: Nadav Haklai <nadavh@marvell.com >
Cc: Neta Zur Hershkovits <neta@marvell.com >
Cc: Kostya Porotchkin <kostap@marvell.com >
Cc: Omri Itach <omrii@marvell.com >
Cc: Igal Liberman <igall@marvell.com >
Cc: Haim Boot <hayim@marvell.com >
Cc: Hanna Hawa <hannah@marvell.com >
2016-12-05 13:34:33 +01:00
96816a843f
arm64: mvebu: Add support for the DB-88F8040 Armada 8k devel board
...
This patch adds the necessary files to support the Marvell Armada 8k
devel board. Most board specfic files are shared with the Armada 7k
boards under the name "armada-8k*". So only minimal changes are
necessary to add this basic board support (except the DT files of
course).
Signed-off-by: Stefan Roese <sr@denx.de >
Cc: Nadav Haklai <nadavh@marvell.com >
Cc: Neta Zur Hershkovits <neta@marvell.com >
Cc: Kostya Porotchkin <kostap@marvell.com >
Cc: Omri Itach <omrii@marvell.com >
Cc: Igal Liberman <igall@marvell.com >
Cc: Haim Boot <hayim@marvell.com >
Cc: Hanna Hawa <hannah@marvell.com >
2016-12-05 13:28:23 +01:00
Icenowy Zheng