name: flash-aminpa-V1.5.yml
# Production hardware flashing for Amin Pardaz Asia device v1.5

on:
  push:
    branches:
      - main

concurrency:
  group: aminpa-serial-flash
  cancel-in-progress: false

jobs:
  flash-aminpa:
    name: Hardware flashing - Amin Pardaz Asia v1.5
    runs-on: serial-runner

    steps:
      - name: Checkout Repository
        uses: actions/checkout@v4

      - name: Validate all firmware files before erasing flash
        run: |
          /usr/bin/python3 - <<'PY'
          from pathlib import Path

          required = {
              "u-boot-sunxi-with-spl.bin": 32,
              "sun8i-v3s-licheepi-zero-dock.dtb": 32,
              "zImage": 64,
              "rootfs.squashfs": 64,
          }
          for filename, minimum in required.items():
              path = Path("firmware") / filename
              if not path.is_file() or path.stat().st_size < minimum:
                  raise SystemExit(f"Missing or invalid firmware: {path}")
              print(f"Found {path}: {path.stat().st_size} bytes")
          PY

      - name: Check current U-Boot CLI
        run: /usr/bin/python3 deployment/serial/serial_command.py check

      - name: Configure and verify network
        env:
          UBOOT_DEVICE_IP: ${{ vars.UBOOT_DEVICE_IP || '192.168.75.100' }}
          TFTP_SERVER_IP: ${{ vars.TFTP_SERVER_IP || '192.168.75.247' }}
        run: |
          /usr/bin/python3 deployment/serial/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP"

      - name: Check all firmware sizes against detected flash layout
        run: /usr/bin/python3 deployment/serial/serial_command.py preflight

      - name: Erase detected SPI flash and verify sample
        run: /usr/bin/python3 deployment/serial/serial_command.py erase

      - name: Transfer, write and verify U-Boot
        run: /usr/bin/python3 deployment/serial/serial_command.py transfer

      - name: Transfer, write and verify DTB
        run: /usr/bin/python3 deployment/serial/serial_command.py transfer-dtb

      - name: Transfer, write and verify Kernel
        run: /usr/bin/python3 deployment/serial/serial_command.py transfer-kernel

      - name: Transfer, write and verify RootFS
        run: /usr/bin/python3 deployment/serial/serial_command.py transfer-rootfs

      - name: Inspect boot configuration
        run: /usr/bin/python3 deployment/serial/serial_command.py boot-config

      - name: Configure and verify bootcmd for detected flash
        run: /usr/bin/python3 deployment/serial/serial_command.py set-bootcmd

      # - name: Save U-Boot environment before reboot
      #   run: /usr/bin/python3 deployment/serial/serial_command.py saveenv

      - name: Reboot hardware after successful flashing
        run: /usr/bin/python3 deployment/serial/serial_command.py reboot