اضافه شدن ورک فلو برد تستی

.gitea/workflows/flash-aminpa-V1.5.yml

@@ -0,0 +1,65 @@
+name: flash-aminpa-V1.5
+# Production flash for Amin Pardaz Asia device v1.5
+
+on:
+  push:
+    branches:
+      - main
+
+concurrency:
+  group: aminpa-serial-flash
+  cancel-in-progress: false
+
+jobs:
+  flash-aminpa:
+    name: Production flash - Amin Pardaz Asia v1.5
+    runs-on: serial-runner
+
+    steps:
+      - name: Checkout Repository
+        uses: actions/checkout@v4
+
+      - name: Validate all firmware files before erasing flash
+        run: |
+          /usr/bin/python3 - <<'PY'
+          from pathlib import Path
+
+          required = {
+              "u-boot-sunxi-with-spl.bin": 32,
+              "sun8i-v3s-licheepi-zero-dock.dtb": 32,
+              "zImage": 64,
+              "rootfs.squashfs": 64,
+          }
+          for filename, minimum in required.items():
+              path = Path("firmware") / filename
+              if not path.is_file() or path.stat().st_size < minimum:
+                  raise SystemExit(f"Missing or invalid firmware: {path}")
+              print(f"Found {path}: {path.stat().st_size} bytes")
+          PY
+
+      - name: Check current U-Boot CLI
+        run: /usr/bin/python3 scripts/serial_command.py check
+
+      - name: Configure and verify network
+        run: /usr/bin/python3 scripts/serial_command.py configure
+
+      - name: Check all firmware sizes against detected flash layout
+        run: /usr/bin/python3 scripts/serial_command.py preflight
+
+      - name: Erase detected SPI flash and verify sample
+        run: /usr/bin/python3 scripts/serial_command.py erase
+
+      - name: Transfer, write and verify U-Boot
+        run: /usr/bin/python3 scripts/serial_command.py transfer
+
+      - name: Transfer, write and verify DTB
+        run: /usr/bin/python3 scripts/serial_command.py transfer-dtb
+
+      - name: Transfer, write and verify Kernel
+        run: /usr/bin/python3 scripts/serial_command.py transfer-kernel
+
+      - name: Transfer, write and verify RootFS
+        run: /usr/bin/python3 scripts/serial_command.py transfer-rootfs
+
+      - name: Inspect boot configuration
+        run: /usr/bin/python3 scripts/serial_command.py boot-config

.gitea/workflows/flash-erase.yml

@@ -1,4 +1,4 @@
-name: Erase Entire 32 MiB SPI Flash
+name: Detect and Erase Entire SPI Flash
 
 on:
   workflow_dispatch:

.gitea/workflows/rootfs-transfer.yml

@@ -2,11 +2,6 @@ name: Transfer, Write and Verify RootFS
 
 on:
   workflow_dispatch:
-    inputs:
-      rootfs_size:
-        description: 'Actual RootFS partition size in bytes (decimal or 0x-prefixed hex)'
-        required: true
-        type: string
 
 jobs:
   rootfs-transfer:
@@ -16,8 +11,6 @@ jobs:
       - name: Checkout Repository
         uses: actions/checkout@v4
 
-      - name: Transfer RootFS, write SPI flash and verify read-back
-        env:
-          ROOTFS_PARTITION_SIZE: ${{ inputs.rootfs_size }}
+      - name: Detect flash, transfer RootFS and verify read-back
         run: |
-          /usr/bin/python3 scripts/serial_command.py transfer-rootfs --rootfs-size "$ROOTFS_PARTITION_SIZE"
+          /usr/bin/python3 scripts/serial_command.py transfer-rootfs

firmware/README.md

@@ -1,6 +1,29 @@
+Place firmware files here and serve this directory as the existing TFTP
+server root. Checkout alone does not publish files over TFTP.
 
-The separate `Erase Entire 32 MiB SPI Flash` workflow erases offsets
-0x0 through 0x1ffffff, including all firmware and any saved environment.
-It requires a successful 32 MiB flash probe, checks the erase/read command
-results, and verifies that the first 256 bytes are FF. This sample does
-not verify every byte of the flash. No automatic retries are performed.
+Every transfer starts with sf probe 0:0. The reported total capacity must
+be exactly 16 or 32 MiB; an unknown or ambiguous result stops execution.
+The selected offsets and maximum sizes (hex bytes) are:
+
+| File | 16 MiB offset / maximum | 32 MiB offset / maximum |
+| --- | --- | --- |
+| u-boot-sunxi-with-spl.bin | 0 / 0x100000 | 0 / 0x200000 |
+| sun8i-v3s-licheepi-zero-dock.dtb | 0x100000 / 0x10000 | 0x200000 / 0x110000 |
+| zImage | 0x110000 / 0x500000 | 0x310000 / 0x500000 |
+| rootfs.squashfs | 0x610000 / 0x900000 | 0x810000 / 0x17f0000 |
+
+The 32 MiB layout allocates the remainder of flash to RootFS. These are
+selected project layouts, not partition tables read from the chip. DTB
+partitions and bootcmd must match the selected layout. A smaller actual
+RootFS region can be specified with --rootfs-size; larger overrides fail.
+
+Transfers reset and verify filesize=0 before TFTP, require successful
+transfer output and status, and compare the hexadecimal filesize with the
+local file and transfer count. First 32 bytes (U-Boot/DTB) or 64 bytes
+(Kernel/RootFS) are compared with the local file. Writes are read back at
+0x42800000 and compared in full. No automatic erase or retry is performed
+in transfer workflows. Flash must be erased before programming as needed.
+
+The separate erase workflow detects capacity and erases the entire chip,
+including firmware and saved environment. It verifies only the first 256
+bytes as FF, not every byte. No workflow automatically reboots the board.

scripts/serial_command.py

@@ -82,16 +82,37 @@ class UBoot:
         return output
 
 
+LAYOUTS = {
+    16: {"uboot": (0, 0x100000), "dtb": (0x100000, 0x10000),
+         "kernel": (0x110000, 0x500000), "rootfs": (0x610000, 0x900000)},
+    32: {"uboot": (0, 0x200000), "dtb": (0x200000, 0x110000),
+         "kernel": (0x310000, 0x500000), "rootfs": (0x810000, 0x17f0000)},
+}
+
+
+def detect_flash(cli):
+    output = cli.command("sf probe 0:0", r"^SF: Detected .+", timeout=20)
+    capacities = re.findall(r"^SF: Detected .*\btotal (\d+) MiB\s*$", output, re.MULTILINE)
+    if len(capacities) != 1 or int(capacities[0]) not in LAYOUTS:
+        raise RuntimeError("Unsupported or ambiguous flash capacity; expected 16 or 32 MiB")
+    capacity = int(capacities[0])
+    print(f"\nDetected {capacity} MiB ({capacity * 8} Mbit); selecting matching flash layout.")
+    return capacity
+
+
 def transfer(cli, firmware, *, dtb=False, kernel=False, rootfs=False, rootfs_size=None):
+    capacity = detect_flash(cli)
+    part = "rootfs" if rootfs else "kernel" if kernel else "dtb" if dtb else "uboot"
+    offset, limit = LAYOUTS[capacity][part]
     address = 0x41000000 if (dtb or rootfs) else 0x42000000
-    offset = 0x310000 if kernel else (0x200000 if dtb else 0)
-    limit = 0x500000 if kernel else (0x110000 if dtb else 0x200000)
-    dump_size = 64 if kernel else 32
-    filename = "zImage" if kernel else ("sun8i-v3s-licheepi-zero-dock.dtb" if dtb else "u-boot-sunxi-with-spl.bin")
-    if rootfs:
-        if rootfs_size is None or rootfs_size < 64:
-            raise RuntimeError("Actual RootFS partition size is required (at least 64 bytes)")
-        offset, limit, dump_size, filename = 0x810000, rootfs_size, 64, "rootfs.squashfs"
+    dump_size = 64 if (kernel or rootfs) else 32
+    filename = {"uboot": "u-boot-sunxi-with-spl.bin", "dtb": "sun8i-v3s-licheepi-zero-dock.dtb",
+                "kernel": "zImage", "rootfs": "rootfs.squashfs"}[part]
+    if rootfs_size is not None and rootfs:
+        if not 64 <= rootfs_size <= limit:
+            raise RuntimeError("RootFS size override exceeds the selected partition or is invalid")
+        limit = rootfs_size
+    print(f"Selected {part}: flash offset {offset:#x}, maximum size {limit:#x}")
     image = firmware.read_bytes()
     if not dump_size <= len(image) <= limit:
         raise RuntimeError(f"Firmware size must be between {dump_size} and {limit:#x} bytes")
@@ -122,7 +143,6 @@ def transfer(cli, firmware, *, dtb=False, kernel=False, rootfs=False, rootfs_siz
     if dumped != image[:dump_size]:
         raise RuntimeError(f"First {dump_size} bytes in RAM differ from the local firmware file")
     print(f"\nTransfer verified: size and first {dump_size} bytes match.")
-    cli.command("sf probe 0:0", r"^SF: Detected .+", timeout=20)
     cli.command(
         f"sf write {address:#x} {offset:#x} ${{filesize}}",
         rf"^SF: {len(image)} bytes @ {offset:#x} Written: OK\s*$", timeout=120,
@@ -142,10 +162,11 @@ def transfer(cli, firmware, *, dtb=False, kernel=False, rootfs=False, rootfs_siz
 
 
 def erase_flash(cli):
-    cli.command("sf probe 0:0", r"^SF: Detected .+total 32 MiB\s*$", timeout=20)
+    capacity = detect_flash(cli)
+    length = capacity * 1024 * 1024
     cli.command(
-        "sf erase 0x0 0x2000000",
-        r"^SF: 33554432 bytes @ 0x0 Erased: OK\s*$", timeout=600,
+        f"sf erase 0x0 {length:#x}",
+        rf"^SF: {length} bytes @ 0x0 Erased: OK\s*$", timeout=600,
     )
     cli.command(
         "sf read 0x42800000 0x0 0x100",
@@ -178,14 +199,12 @@ def boot_config(cli, confirmed=False):
 
 def main():
     parser = argparse.ArgumentParser()
-    parser.add_argument("mode", choices=("check", "configure", "transfer", "transfer-dtb", "transfer-kernel", "transfer-rootfs", "erase", "boot-config"), default="check", nargs="?")
+    parser.add_argument("mode", choices=("check", "configure", "transfer", "transfer-dtb", "transfer-kernel", "transfer-rootfs", "erase", "boot-config", "preflight"), default="check", nargs="?")
     parser.add_argument("--port", default="/dev/ttyUSB0")
     parser.add_argument("--firmware", type=Path, default=None)
     parser.add_argument("--rootfs-size", type=lambda value: int(value, 0), help="Actual RootFS partition size in bytes (decimal or 0x-prefixed hex)")
     parser.add_argument("--confirm-squashfs-mtdblock3", action="store_true", help="Confirm actual RootFS is SquashFS on mtdblock3 and set bootargs")
     args = parser.parse_args()
-    if args.mode == "transfer-rootfs" and (args.rootfs_size is None or args.rootfs_size < 64):
-        parser.error("--rootfs-size must specify the actual RootFS partition size (at least 64 bytes)")
     if args.firmware is None:
         filename = "rootfs.squashfs" if args.mode == "transfer-rootfs" else "zImage" if args.mode == "transfer-kernel" else ("sun8i-v3s-licheepi-zero-dock.dtb" if args.mode == "transfer-dtb" else "u-boot-sunxi-with-spl.bin")
         args.firmware = Path(__file__).resolve().parent.parent / "firmware" / filename
@@ -199,6 +218,18 @@ def main():
             cli.detect()
             if args.mode == "check":
                 return
+            if args.mode == "preflight":
+                capacity = detect_flash(cli)
+                files = {"uboot": "u-boot-sunxi-with-spl.bin", "dtb": "sun8i-v3s-licheepi-zero-dock.dtb",
+                         "kernel": "zImage", "rootfs": "rootfs.squashfs"}
+                for part, filename in files.items():
+                    path = Path(__file__).resolve().parent.parent / "firmware" / filename
+                    minimum = 64 if part in ("kernel", "rootfs") else 32
+                    limit = LAYOUTS[capacity][part][1]
+                    if not path.is_file() or not minimum <= path.stat().st_size <= limit:
+                        raise RuntimeError(f"Firmware missing or outside selected partition size: {path} (maximum {limit:#x})")
+                print("All firmware sizes fit the detected flash layout.")
+                return
             if args.mode == "erase":
                 erase_flash(cli)
                 return