اصلاح ورک فلو

.gitea/workflows/boot-config.yml

@@ -22,7 +22,7 @@ jobs:
           CONFIRM_SQUASHFS_MTDBLOCK3: ${{ inputs.confirm_squashfs_mtdblock3 }}
         run: |
           if [ "$CONFIRM_SQUASHFS_MTDBLOCK3" = "true" ]; then
-            /usr/bin/python3 scripts/serial_command.py boot-config --confirm-squashfs-mtdblock3
+            /usr/bin/python3 deployment/serial/serial_command.py boot-config --confirm-squashfs-mtdblock3
           else
-            /usr/bin/python3 scripts/serial_command.py boot-config
+            /usr/bin/python3 deployment/serial/serial_command.py boot-config
           fi

.gitea/workflows/bootcmd.yml

@@ -12,4 +12,4 @@ jobs:
         uses: actions/checkout@v4
 
       - name: Detect flash, set bootcmd and verify
-        run: /usr/bin/python3 scripts/serial_command.py set-bootcmd
+        run: /usr/bin/python3 deployment/serial/serial_command.py set-bootcmd

.gitea/workflows/dtb-transfer.yml

@@ -13,4 +13,4 @@ jobs:
 
       - name: Transfer DTB, write SPI flash and verify read-back
         run: |
-          /usr/bin/python3 scripts/serial_command.py transfer-dtb
+          /usr/bin/python3 deployment/serial/serial_command.py transfer-dtb

.gitea/workflows/flash-aminpa-V1.5.yml

@@ -38,41 +38,41 @@ jobs:
           PY
 
       - name: Check current U-Boot CLI
-        run: /usr/bin/python3 scripts/serial_command.py check
+        run: /usr/bin/python3 deployment/serial/serial_command.py check
 
       - name: Configure and verify network
         env:
           UBOOT_DEVICE_IP: ${{ vars.UBOOT_DEVICE_IP || '192.168.75.100' }}
           TFTP_SERVER_IP: ${{ vars.TFTP_SERVER_IP || '192.168.75.247' }}
         run: |
-          /usr/bin/python3 scripts/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP"
+          /usr/bin/python3 deployment/serial/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP"
 
       - name: Check all firmware sizes against detected flash layout
-        run: /usr/bin/python3 scripts/serial_command.py preflight
+        run: /usr/bin/python3 deployment/serial/serial_command.py preflight
 
       - name: Erase detected SPI flash and verify sample
-        run: /usr/bin/python3 scripts/serial_command.py erase
+        run: /usr/bin/python3 deployment/serial/serial_command.py erase
 
       - name: Transfer, write and verify U-Boot
-        run: /usr/bin/python3 scripts/serial_command.py transfer
+        run: /usr/bin/python3 deployment/serial/serial_command.py transfer
 
       - name: Transfer, write and verify DTB
-        run: /usr/bin/python3 scripts/serial_command.py transfer-dtb
+        run: /usr/bin/python3 deployment/serial/serial_command.py transfer-dtb
 
       - name: Transfer, write and verify Kernel
-        run: /usr/bin/python3 scripts/serial_command.py transfer-kernel
+        run: /usr/bin/python3 deployment/serial/serial_command.py transfer-kernel
 
       - name: Transfer, write and verify RootFS
-        run: /usr/bin/python3 scripts/serial_command.py transfer-rootfs
+        run: /usr/bin/python3 deployment/serial/serial_command.py transfer-rootfs
 
       - name: Inspect boot configuration
-        run: /usr/bin/python3 scripts/serial_command.py boot-config
+        run: /usr/bin/python3 deployment/serial/serial_command.py boot-config
 
       - name: Configure and verify bootcmd for detected flash
-        run: /usr/bin/python3 scripts/serial_command.py set-bootcmd
+        run: /usr/bin/python3 deployment/serial/serial_command.py set-bootcmd
 
-      - name: Save U-Boot environment before reboot
+      # - name: Save U-Boot environment before reboot
-        run: /usr/bin/python3 scripts/serial_command.py saveenv
+      #   run: /usr/bin/python3 deployment/serial/serial_command.py saveenv
 
       - name: Reboot hardware after successful flashing
-        run: /usr/bin/python3 scripts/serial_command.py reboot
+        run: /usr/bin/python3 deployment/serial/serial_command.py reboot

.gitea/workflows/flash-erase.yml

@@ -13,4 +13,4 @@ jobs:
 
       - name: Erase entire flash and verify first 256 bytes
         run: |
-          /usr/bin/python3 scripts/serial_command.py erase
+          /usr/bin/python3 deployment/serial/serial_command.py erase

.gitea/workflows/init-test.yml

@@ -0,0 +1,24 @@
+name: init test
+
+on:
+  workflow_dispatch:
+
+jobs:
+  init-test:
+    runs-on: serial-runner
+    steps:
+      - name: Checkout Repository
+        uses: actions/checkout@v4
+
+      - name: Verify ordered boot and Linux console
+        env:
+          RUTBS_PASSWORD: ${{ secrets.RUTBS_PASSWORD }}
+        run: /usr/bin/python3 deployment/serial/init_test.py
+
+      - name: Upload redacted serial log
+        if: ${{ always() }}
+        uses: actions/upload-artifact@v3
+        with:
+          name: boot-log
+          path: artifacts/boot.log
+          if-no-files-found: error

.gitea/workflows/kernel-transfer.yml

@@ -13,4 +13,4 @@ jobs:
 
       - name: Transfer Kernel, write SPI flash and verify read-back
         run: |
-          /usr/bin/python3 scripts/serial_command.py transfer-kernel
+          /usr/bin/python3 deployment/serial/serial_command.py transfer-kernel

.gitea/workflows/rootfs-transfer.yml

@@ -13,4 +13,4 @@ jobs:
 
       - name: Detect flash, transfer RootFS and verify read-back
         run: |
-          /usr/bin/python3 scripts/serial_command.py transfer-rootfs
+          /usr/bin/python3 deployment/serial/serial_command.py transfer-rootfs

.gitea/workflows/serial.yml

@@ -13,4 +13,4 @@ jobs:
 
       - name: Check current U-Boot CLI prompt
         run: |
-          /usr/bin/python3 scripts/serial_command.py check
+          /usr/bin/python3 deployment/serial/serial_command.py check

.gitea/workflows/software-test-aminpa-V1.5.yml

@@ -27,4 +27,4 @@ jobs:
           TEST_HOST_IP: ${{ vars.TEST_HOST_IP || '192.168.75.15' }}
           TEST_DEVICE_IP: ${{ vars.TEST_DEVICE_IP }}
         run: |
-          /usr/bin/python3 scripts/software_test.py --interface "$TEST_INTERFACE" --host-ip "$TEST_HOST_IP" --device-ip "$TEST_DEVICE_IP"
+          /usr/bin/python3 deployment/serial/software_test.py --interface "$TEST_INTERFACE" --host-ip "$TEST_HOST_IP" --device-ip "$TEST_DEVICE_IP"

.gitea/workflows/uboot-setup.yml

@@ -16,4 +16,4 @@ jobs:
           UBOOT_DEVICE_IP: ${{ vars.UBOOT_DEVICE_IP || '192.168.75.100' }}
           TFTP_SERVER_IP: ${{ vars.TFTP_SERVER_IP || '192.168.75.247' }}
         run: |
-          /usr/bin/python3 scripts/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP"
+          /usr/bin/python3 deployment/serial/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP"

.gitea/workflows/uboot-transfer.yml

@@ -13,4 +13,4 @@ jobs:
 
       - name: Transfer firmware, write SPI flash and verify read-back
         run: |
-          /usr/bin/python3 scripts/serial_command.py transfer
+          /usr/bin/python3 deployment/serial/serial_command.py transfer

README.md

@@ -21,7 +21,7 @@ workflow تنظیم شبکه و workflow اصلی فلش از آن‌ها است
 نمونهٔ اجرای مستقیم:
 
 ```bash
-/usr/bin/python3 scripts/serial_command.py configure \
+/usr/bin/python3 deployment/serial/serial_command.py configure \
   --device-ip 192.168.75.100 \
   --tftp-server-ip 192.168.75.247
 ```
@@ -53,10 +53,48 @@ IP میزبان باید از قبل روی کارت شبکهٔ انتخاب‌
 نمونهٔ اجرای دستی روی runner با جایگزین‌کردن IP واقعی دستگاه:
 
 ```bash
-/usr/bin/python3 scripts/software_test.py \
+/usr/bin/python3 deployment/serial/software_test.py \
   --interface eno1 \
   --host-ip 192.168.75.15 \
   --device-ip <DEVICE_IP>
 ```
 
 برای محل فایل‌های firmware و نقشهٔ فلش، [راهنمای firmware](firmware/README.md) را ببینید.
+
+## ساختار استقرار
+
+اسکریپت‌های اجرایی در `deployment/serial/` قرار دارند:
+
+- `serial_command.py`: کنترل U-Boot، فلش و راه‌اندازی برد از طریق سریال.
+- `software_test.py`: بررسی پاسخ ping دستگاه پس از بوت.
+
+workflowهای اصلی امین‌پرداز و ورودی‌های workflowهای کمکی در
+`.gitea/workflows/` باقی می‌مانند و اسکریپت‌ها را از مسیر جدید اجرا می‌کنند.
+فایل‌های باینری همچنان در پوشهٔ `firmware/` ریشهٔ مخزن قرار می‌گیرند.
+
+## تست ترتیب بوت از طریق Serial
+
+workflow دستی `init test` از فایل `.gitea/workflows/init-test.yml` اجرا می‌شود.
+رمز دستگاه را با نام `RUTBS_PASSWORD` در **Actions → Secrets** مخزن تعریف کنید؛
+رمز در سورس یا متغیرهای عمومی قرار نمی‌گیرد. رانر به `pyserial` و دسترسی
+به پورت `/dev/ttyUSB0` نیاز دارد.
+
+برای اجرای مستقیم، رمز را بدون نمایش در ترمینال دریافت کنید:
+
+```bash
+read -rs -p 'RUTBS password: ' RUTBS_PASSWORD
+export RUTBS_PASSWORD
+python3 deployment/serial/init_test.py
+unset RUTBS_PASSWORD
+```
+
+برای پورت دیگر، گزینهٔ `--port /dev/ttyUSB1` را اضافه کنید.
+هنگام اجرای تست، برد باید در پرامپت U-Boot یعنی `=>` باشد.
+اسکریپت ابتدا با ارسال Enter پرامپت را تازه می‌کند و پس از تشخیص آن،
+دستور `res` را برای ریبوت می‌فرستد؛ سپس مراحل بوت را به‌ترتیب بررسی می‌کند.
+این تست باید پیام‌های انتخاب سطح دیباگ و فعال‌سازی کنسول را ببیند و
+با workflow دیگری که همان پورت Serial را استفاده می‌کند هم‌زمان اجرا نشود.
+از شروع تست، مهلت مشترک مراحل ۱۸۰ ثانیه است. تنها پس از ورود و دریافت
+خروجی دقیق `Linux` از `uname -s`، پیام `BOOT TEST: PASS` و کد خروج صفر
+برگردانده می‌شود. خطا کد خروج غیرصفر دارد. لاگ Serial با حذف رمز در
+`artifacts/boot.log` ذخیره و حتی در شکست تست به‌صورت آرتیفکت بارگذاری می‌شود.

deployment/serial/init_test.py

@@ -0,0 +1,127 @@
+"""Restart RUTBS from U-Boot and verify the ordered boot and kernel name."""
+import argparse
+import fcntl
+import os
+import re
+import time
+from pathlib import Path
+
+import serial
+
+
+STAGES = (
+    ('U-Boot prompt', '=>', b'res\r'),
+    ('kernel', 'Starting kernel ...', None),
+    ('debug selection', 'Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level', None),
+    ('console activation', 'Please press Enter to activate this console.', b'\r'),
+    ('login', 'RUTBS login:', b'root\r'),
+    ('password', 'Password:', 'password'),
+    ('shell', 'root@RUTBS:~#', b'uname -s\r'),
+    ('command result', 'root@RUTBS:~#', None),
+)
+FAILURE = re.compile(r'Kernel panic|Login incorrect|Login failed|Authentication fail(?:ed|ure)|Access denied', re.I)
+
+
+def run_test(port, password, transcript, deadline):
+    stage = 0
+    pending = ''
+    observed = ''
+    # Request a fresh prompt when the existing => predates opening the port.
+    remaining = deadline - time.monotonic()
+    if remaining <= 0:
+        raise RuntimeError('Overall test timeout')
+    port.write_timeout = min(2, remaining)
+    if port.write(b'\r') != 1:
+        raise RuntimeError('Incomplete serial write')
+    while time.monotonic() < deadline:
+        data = port.read(min(port.in_waiting or 1, 4096))
+        if not data:
+            continue
+        transcript.extend(data)
+        chunk = data.decode('utf-8', errors='replace').replace('\r', '')
+        pending += chunk
+        observed = (observed + chunk)[-8192:]
+        if FAILURE.search(observed):
+            raise RuntimeError('Boot or authentication failure detected')
+        while stage < len(STAGES):
+            name, token, action = STAGES[stage]
+            if stage == 0:
+                match = re.search(r'(?:^|\n)[^\n]*=> *$', pending)
+                position = pending.rfind('=>') if match else -1
+            else:
+                position = pending.find(token)
+            if position < 0:
+                break
+            before = pending[:position]
+            pending = pending[position + len(token):]
+            if stage == len(STAGES) - 1:
+                lines = [line.strip() for line in before.splitlines() if line.strip()]
+                if lines and lines[0] == 'uname -s':
+                    lines.pop(0)  # A terminal may echo the command.
+                if lines != ['Linux']:
+                    raise RuntimeError('uname -s output was not exactly Linux')
+                if time.monotonic() >= deadline:
+                    raise RuntimeError('Overall test timeout')
+                return
+            if action is not None:
+                # Discard pre-existing input: the next prompt must follow our write.
+                pending = ''
+                payload = password.encode('utf-8') + b'\r' if action == 'password' else action
+                remaining = deadline - time.monotonic()
+                if remaining <= 0:
+                    raise RuntimeError('Overall test timeout')
+                port.write_timeout = min(2, remaining)
+                if port.write(payload) != len(payload):
+                    raise RuntimeError('Incomplete serial write')
+            stage += 1
+        if len(pending) > 65536:
+            raise RuntimeError('Unexpected excessive serial output in current stage')
+    raise RuntimeError('Timeout waiting for ' + STAGES[stage][0])
+
+
+def main():
+    parser = argparse.ArgumentParser()
+    parser.add_argument('--port', default='/dev/ttyUSB0')
+    args = parser.parse_args()
+    deadline = time.monotonic() + 180
+    password = os.environ.get('RUTBS_PASSWORD', '')
+    transcript = bytearray()
+    result = 1
+    reason = 'Serial connection or configuration error'
+    log = Path('artifacts/boot.log')
+    try:
+        log.parent.mkdir(parents=True, exist_ok=True)
+        # Never put raw serial bytes on disk or stdout, even during authentication.
+        log.write_text('', encoding='utf-8')
+        if not password or any(c in password for c in '\r\n\x00'):
+            raise RuntimeError('RUTBS_PASSWORD is missing or invalid')
+        with open('/tmp/uboot-serial.lock', 'w') as lock:
+            fcntl.flock(lock, fcntl.LOCK_EX | fcntl.LOCK_NB)
+            with serial.Serial(args.port, 115200, timeout=0.1, write_timeout=2, exclusive=True) as port:
+                run_test(port, password, transcript, deadline)
+        result = 0
+    except RuntimeError as exc:
+        reason = str(exc)
+    except Exception:
+        # Serial/library exceptions can include transmitted data; do not print them.
+        pass
+    finally:
+        content = transcript.decode('utf-8', errors='replace').replace('\r', '')
+        if password:
+            content = content.replace(password, '[REDACTED]')
+            reason = reason.replace(password, '[REDACTED]')
+        try:
+            log.write_text(content, encoding='utf-8')
+        except OSError:
+            result = 1
+            reason = 'Could not save serial log'
+    if result:
+        print('BOOT TEST: FAIL')
+        print(reason)
+    else:
+        print('BOOT TEST: PASS')
+    return result
+
+
+if __name__ == '__main__':
+    raise SystemExit(main())

deployment/serial/serial_command.py

@@ -206,7 +206,7 @@ def boot_config(cli, confirmed=False):
     if not confirmed:
         print("\nBoot configuration inspected; no changes requested.")
         return
-    bootargs = "console=ttyS0,115200 loglevel=8 root=/dev/mtdblock3 rootfstype=squashfs ro rootwait"
+    bootargs = "console=ttyS0,115200 loglevel=1 root=/dev/mtdblock3 rootfstype=squashfs ro rootwait"
     cli.command("setenv bootargs '" + bootargs + "'")
     cli.command("printenv bootargs", r"^bootargs=" + re.escape(bootargs) + r"$")
     print("\nBootargs verified in RAM; environment not saved and board not rebooted.")
@@ -224,7 +224,7 @@ def main():
     args = parser.parse_args()
     if args.firmware is None:
         filename = "rootfs.squashfs" if args.mode == "transfer-rootfs" else "zImage" if args.mode == "transfer-kernel" else ("sun8i-v3s-licheepi-zero-dock.dtb" if args.mode == "transfer-dtb" else "u-boot-sunxi-with-spl.bin")
-        args.firmware = Path(__file__).resolve().parent.parent / "firmware" / filename
+        args.firmware = Path(__file__).resolve().parents[2] / "firmware" / filename
     if args.mode in ("transfer", "transfer-dtb", "transfer-kernel", "transfer-rootfs") and not args.firmware.is_file():
         raise RuntimeError("Firmware file not found: " + str(args.firmware))
     # Shared by both workflows: fail rather than interleave serial commands.
@@ -250,7 +250,7 @@ def main():
                 files = {"uboot": "u-boot-sunxi-with-spl.bin", "dtb": "sun8i-v3s-licheepi-zero-dock.dtb",
                          "kernel": "zImage", "rootfs": "rootfs.squashfs"}
                 for part, filename in files.items():
-                    path = Path(__file__).resolve().parent.parent / "firmware" / filename
+                    path = Path(__file__).resolve().parents[2] / "firmware" / filename
                     minimum = 64 if part in ("kernel", "rootfs") else 32
                     limit = LAYOUTS[capacity][part][1]
                     if not path.is_file() or not minimum <= path.stat().st_size <= limit: