اضافه شدن saveenv به انتها ورک فلو ها

.gitea/workflows/flash-aminpa-V1.5.yml

@@ -67,5 +67,8 @@ jobs:
       - name: Configure and verify bootcmd for detected flash
         run: /usr/bin/python3 scripts/serial_command.py set-bootcmd
 
+      - name: Save U-Boot environment before reboot
+        run: /usr/bin/python3 scripts/serial_command.py saveenv
+
       - name: Reboot hardware after successful flashing
         run: /usr/bin/python3 scripts/serial_command.py reboot

scripts/serial_command.py

@@ -213,7 +213,7 @@ def boot_config(cli, confirmed=False):
 
 def main():
     parser = argparse.ArgumentParser()
-    parser.add_argument("mode", choices=("check", "configure", "transfer", "transfer-dtb", "transfer-kernel", "transfer-rootfs", "erase", "boot-config", "preflight", "set-bootcmd", "reboot"), default="check", nargs="?")
+    parser.add_argument("mode", choices=("check", "configure", "transfer", "transfer-dtb", "transfer-kernel", "transfer-rootfs", "erase", "boot-config", "preflight", "set-bootcmd", "saveenv", "reboot"), default="check", nargs="?")
     parser.add_argument("--port", default="/dev/ttyUSB0")
     parser.add_argument("--firmware", type=Path, default=None)
     parser.add_argument("--rootfs-size", type=lambda value: int(value, 0), help="Actual RootFS partition size in bytes (decimal or 0x-prefixed hex)")
@@ -232,6 +232,10 @@ def main():
             cli.detect()
             if args.mode == "check":
                 return
+            if args.mode == "saveenv":
+                cli.command("saveenv", timeout=120)
+                print("Current U-Boot environment saved successfully.", flush=True)
+                return
             if args.mode == "reboot":
                 print("\n>>> reset", flush=True)
                 port.write(b"reset\r")