اصلاح ورک فلو فلش u-boot

.gitea/workflows/uboot-transfer.yml

@@ -1,4 +1,4 @@
-name: Transfer U-Boot to RAM
+name: Transfer, Write and Verify U-Boot
 
 on:
   workflow_dispatch:
@@ -11,6 +11,6 @@ jobs:
       - name: Checkout Repository
         uses: actions/checkout@v4
 
-      - name: Transfer firmware and verify RAM contents
+      - name: Transfer firmware, write SPI flash and verify read-back
         run: |
           /usr/bin/python3 scripts/serial_command.py transfer

firmware/README.md

@@ -1,10 +1,12 @@
-Place `u-boot-sunxi-with-spl.bin` in this directory before running the
+Place `u-boot-sunxi-with-spl.bin` here before running the workflow.
-Transfer U-Boot to RAM workflow.
+The existing TFTP server (`serverip`) must serve this directory as its root.
+Checkout alone does not publish files over TFTP.
 
-The existing TFTP server (`serverip` in U-Boot) must serve this directory
+The workflow clears stale `filesize`, requires a successful TFTP transfer,
-as its TFTP root, so the file is available as `u-boot-sunxi-with-spl.bin`.
+and checks hexadecimal `filesize` against both the transfer count and local
-Checking out this repository alone does not publish files over TFTP.
+file size (32 through 0x200000 bytes). It compares the first 32 RAM bytes
+with the local file, probes SPI flash, writes at offset 0, reads back to
+0x42800000 and compares the full transferred length with `cmp.b`.
 
-The workflow uses the current U-Boot network settings. It verifies the
+No erase, reboot or saveenv command is issued. Any failed or unverified
-transferred size and the first 32 bytes against this local file. It does
+command stops execution; flash writes are never automatically retried.
-not erase or write SPI flash, save the environment, or boot the image.

scripts/serial_command.py

@@ -84,8 +84,10 @@ class UBoot:
 
 def transfer(cli, firmware):
     image = firmware.read_bytes()
-    if not 32 <= len(image) <= 0x02000000:
+    if not 32 <= len(image) <= 0x200000:
-        raise RuntimeError("Firmware must contain at least 32 bytes and fit RAM at 0x42000000")
+        raise RuntimeError("Firmware size must be between 32 and 0x200000 bytes")
+    # Invalidate any previous transfer length before attempting a new transfer.
+    cli.command("setenv filesize")
     output = cli.command(
         "tftp 0x42000000 u-boot-sunxi-with-spl.bin",
         r"^Bytes transferred = \d+", timeout=120,
@@ -106,7 +108,24 @@ def transfer(cli, firmware):
         dumped.extend(bytes.fromhex(rows[0]))
     if dumped != image[:32]:
         raise RuntimeError("First 32 bytes in RAM differ from the local firmware file")
-    print("\nTransfer verified: size and first 32 bytes match; no flash write performed.")
+    print("\nTransfer verified: size and first 32 bytes match.")
+    cli.command("sf probe 0:0", r"^SF: Detected .+", timeout=20)
+    cli.command(
+        "sf write 0x42000000 0x0 ${filesize}",
+        rf"^SF: {len(image)} bytes @ 0x0 Written: OK\s*$", timeout=120,
+    )
+    cli.command(
+        "sf read 0x42800000 0x0 ${filesize}",
+        rf"^SF: {len(image)} bytes @ 0x0 Read: OK\s*$", timeout=120,
+    )
+    output = cli.command(
+        "cmp.b 0x42000000 0x42800000 ${filesize}",
+        r"^Total of \d+ byte\(s\) were the same", timeout=60,
+    )
+    compared = re.findall(r"^Total of (\d+) byte\(s\) were the same", output, re.MULTILINE)
+    if compared != [str(len(image))]:
+        raise RuntimeError("Flash comparison byte count differs from firmware size")
+    print("\nU-Boot flash write and full read-back comparison verified.")
 
 
 def main():