diff --git a/.gitea/workflows/flash-aminpa-V1.5.yml b/.gitea/workflows/flash-aminpa-V1.5.yml
index 5fc2343..9bb6aaf 100644
--- a/.gitea/workflows/flash-aminpa-V1.5.yml
+++ b/.gitea/workflows/flash-aminpa-V1.5.yml
@@ -1,5 +1,5 @@
-name: flash-aminpa-V1.5
-# Production flash for Amin Pardaz Asia device v1.5
+name: flash-aminpa-V1.5.yml
+# Production hardware flashing for Amin Pardaz Asia device v1.5
 
 on:
   push:
@@ -12,7 +12,7 @@ concurrency:
 
 jobs:
   flash-aminpa:
-    name: Production flash - Amin Pardaz Asia v1.5
+    name: Hardware flashing - Amin Pardaz Asia v1.5
     runs-on: serial-runner
 
     steps:
@@ -66,3 +66,6 @@ jobs:
 
       - name: Configure and verify bootcmd for detected flash
         run: /usr/bin/python3 scripts/serial_command.py set-bootcmd
+
+      - name: Reboot hardware after successful flashing
+        run: /usr/bin/python3 scripts/serial_command.py reboot
diff --git a/scripts/serial_command.py b/scripts/serial_command.py
index 8a72515..8757f05 100644
--- a/scripts/serial_command.py
+++ b/scripts/serial_command.py
@@ -213,7 +213,7 @@ def boot_config(cli, confirmed=False):
 
 def main():
     parser = argparse.ArgumentParser()
-    parser.add_argument("mode", choices=("check", "configure", "transfer", "transfer-dtb", "transfer-kernel", "transfer-rootfs", "erase", "boot-config", "preflight", "set-bootcmd"), default="check", nargs="?")
+    parser.add_argument("mode", choices=("check", "configure", "transfer", "transfer-dtb", "transfer-kernel", "transfer-rootfs", "erase", "boot-config", "preflight", "set-bootcmd", "reboot"), default="check", nargs="?")
     parser.add_argument("--port", default="/dev/ttyUSB0")
     parser.add_argument("--firmware", type=Path, default=None)
     parser.add_argument("--rootfs-size", type=lambda value: int(value, 0), help="Actual RootFS partition size in bytes (decimal or 0x-prefixed hex)")
@@ -232,6 +232,12 @@ def main():
             cli.detect()
             if args.mode == "check":
                 return
+            if args.mode == "reboot":
+                print("\n>>> reset", flush=True)
+                port.write(b"reset\r")
+                port.flush()
+                print("Reset command sent; reboot completion has not been verified.", flush=True)
+                return
             if args.mode == "preflight":
                 capacity = detect_flash(cli)
                 files = {"uboot": "u-boot-sunxi-with-spl.bin", "dtb": "sun8i-v3s-licheepi-zero-dock.dtb",