diff --git a/firmware/README.md b/firmware/README.md
deleted file mode 100644
index 9f05126..0000000
--- a/firmware/README.md
+++ /dev/null
@@ -1,29 +0,0 @@
-Place `u-boot-sunxi-with-spl.bin` here before running the workflow.
-The existing TFTP server (`serverip`) must serve this directory as its root.
-Checkout alone does not publish files over TFTP.
-
-The workflow clears stale `filesize`, requires a successful TFTP transfer,
-and checks hexadecimal `filesize` against both the transfer count and local
-file size (32 through 0x200000 bytes). It compares the first 32 RAM bytes
-with the local file, probes SPI flash, writes at offset 0, reads back to
-0x42800000 and compares the full transferred length with `cmp.b`.
-
-No erase, reboot or saveenv command is issued. Any failed or unverified
-command stops execution; flash writes are never automatically retried.
-
-For the DTB workflow, place `sun8i-v3s-licheepi-zero-dock.dtb` here.
-It uses the same checks, with maximum size 0x110000, RAM address
-0x41000000 and flash offset 0x200000. Read-back uses 0x42800000.
-
-For the Kernel workflow, place `zImage` here. It uses maximum size
-0x500000, RAM address 0x42000000 and flash offset 0x310000. The first
-64 bytes are checked against the local file; full read-back comparison
-uses 0x42800000. The same stale-filesize and transfer checks apply.
-
-For the RootFS workflow, place `rootfs.squashfs` here and supply the actual
-RootFS partition size in bytes as the required `rootfs_size` workflow input
-(decimal or 0x-prefixed hex). Determine it from the real board partition map;
-the workflow does not infer it from flash capacity or a presumed layout.
-It uses RAM 0x41000000, flash offset 0x810000, a 64-byte header comparison,
-and read-back RAM 0x42800000. Files must fit the specified partition and
-the non-overlapping RAM buffers (maximum 0x1800000 bytes).
diff --git a/firmware/rootfs.squashfs b/firmware/rootfs.squashfs
new file mode 100644
index 0000000..5e8d89a
Binary files /dev/null and b/firmware/rootfs.squashfs differ
diff --git a/firmware/sun8i-v3s-licheepi-zero-dock.dtb b/firmware/sun8i-v3s-licheepi-zero-dock.dtb
new file mode 100644
index 0000000..895ee6b
Binary files /dev/null and b/firmware/sun8i-v3s-licheepi-zero-dock.dtb differ
diff --git a/firmware/u-boot-sunxi-with-spl.bin b/firmware/u-boot-sunxi-with-spl.bin
new file mode 100644
index 0000000..88ee4e3
Binary files /dev/null and b/firmware/u-boot-sunxi-with-spl.bin differ
diff --git a/firmware/zImage b/firmware/zImage
new file mode 100755
index 0000000..2f547b9
Binary files /dev/null and b/firmware/zImage differ