محمدامین خزاعی/workflow-flash-with-uboot
1
انشعاب 0
محتوا وظایف درخواست‌های ادغام فرایندها برد پروژه نسخه‌های ارائه‌شده فعالیت

اصلاح ورک فلو های استقرار

فهرست منبع
This commit is contained in:
nearology
2026-11-10 12:59:46 +03:30
والد 9b5bff8002
کامیت 0528032639
14فایلهای تغییر یافته به همراه38 افزوده شده و 27 حذف شده
دانلود پرونده وصله دانلود فایل تغییرات diff Expand all files Collapse all files
.gitea/workflows/boot-config.yml
+2 -2
مشاهده پرونده
@@ -22,7 +22,7 @@ jobs:
CONFIRM_SQUASHFS_MTDBLOCK3: ${{ inputs.confirm_squashfs_mtdblock3 }} CONFIRM_SQUASHFS_MTDBLOCK3: ${{ inputs.confirm_squashfs_mtdblock3 }}
run: | run: |
if [ "$CONFIRM_SQUASHFS_MTDBLOCK3" = "true" ]; then if [ "$CONFIRM_SQUASHFS_MTDBLOCK3" = "true" ]; then
/usr/bin/python3 scripts/serial_command.py boot-config --confirm-squashfs-mtdblock3 /usr/bin/python3 deployment/serial/serial_command.py boot-config --confirm-squashfs-mtdblock3
else else
/usr/bin/python3 scripts/serial_command.py boot-config /usr/bin/python3 deployment/serial/serial_command.py boot-config
fi fi
.gitea/workflows/bootcmd.yml
+1 -1
مشاهده پرونده
@@ -12,4 +12,4 @@ jobs:
uses: actions/checkout@v4 uses: actions/checkout@v4
- name: Detect flash, set bootcmd and verify - name: Detect flash, set bootcmd and verify
run: /usr/bin/python3 scripts/serial_command.py set-bootcmd run: /usr/bin/python3 deployment/serial/serial_command.py set-bootcmd
.gitea/workflows/dtb-transfer.yml
+1 -1
مشاهده پرونده
@@ -13,4 +13,4 @@ jobs:
- name: Transfer DTB, write SPI flash and verify read-back - name: Transfer DTB, write SPI flash and verify read-back
run: | run: |
/usr/bin/python3 scripts/serial_command.py transfer-dtb /usr/bin/python3 deployment/serial/serial_command.py transfer-dtb
.gitea/workflows/flash-aminpa-V1.5.yml
+12 -12
مشاهده پرونده
@@ -38,41 +38,41 @@ jobs:
PY PY
- name: Check current U-Boot CLI - name: Check current U-Boot CLI
run: /usr/bin/python3 scripts/serial_command.py check run: /usr/bin/python3 deployment/serial/serial_command.py check
- name: Configure and verify network - name: Configure and verify network
env: env:
UBOOT_DEVICE_IP: ${{ vars.UBOOT_DEVICE_IP || '192.168.75.100' }} UBOOT_DEVICE_IP: ${{ vars.UBOOT_DEVICE_IP || '192.168.75.100' }}
TFTP_SERVER_IP: ${{ vars.TFTP_SERVER_IP || '192.168.75.247' }} TFTP_SERVER_IP: ${{ vars.TFTP_SERVER_IP || '192.168.75.247' }}
run: | run: |
/usr/bin/python3 scripts/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP" /usr/bin/python3 deployment/serial/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP"
- name: Check all firmware sizes against detected flash layout - name: Check all firmware sizes against detected flash layout
run: /usr/bin/python3 scripts/serial_command.py preflight run: /usr/bin/python3 deployment/serial/serial_command.py preflight
- name: Erase detected SPI flash and verify sample - name: Erase detected SPI flash and verify sample
run: /usr/bin/python3 scripts/serial_command.py erase run: /usr/bin/python3 deployment/serial/serial_command.py erase
- name: Transfer, write and verify U-Boot - name: Transfer, write and verify U-Boot
run: /usr/bin/python3 scripts/serial_command.py transfer run: /usr/bin/python3 deployment/serial/serial_command.py transfer
- name: Transfer, write and verify DTB - name: Transfer, write and verify DTB
run: /usr/bin/python3 scripts/serial_command.py transfer-dtb run: /usr/bin/python3 deployment/serial/serial_command.py transfer-dtb
- name: Transfer, write and verify Kernel - name: Transfer, write and verify Kernel
run: /usr/bin/python3 scripts/serial_command.py transfer-kernel run: /usr/bin/python3 deployment/serial/serial_command.py transfer-kernel
- name: Transfer, write and verify RootFS - name: Transfer, write and verify RootFS
run: /usr/bin/python3 scripts/serial_command.py transfer-rootfs run: /usr/bin/python3 deployment/serial/serial_command.py transfer-rootfs
- name: Inspect boot configuration - name: Inspect boot configuration
run: /usr/bin/python3 scripts/serial_command.py boot-config run: /usr/bin/python3 deployment/serial/serial_command.py boot-config
- name: Configure and verify bootcmd for detected flash - name: Configure and verify bootcmd for detected flash
run: /usr/bin/python3 scripts/serial_command.py set-bootcmd run: /usr/bin/python3 deployment/serial/serial_command.py set-bootcmd
- name: Save U-Boot environment before reboot - name: Save U-Boot environment before reboot
run: /usr/bin/python3 scripts/serial_command.py saveenv run: /usr/bin/python3 deployment/serial/serial_command.py saveenv
- name: Reboot hardware after successful flashing - name: Reboot hardware after successful flashing
run: /usr/bin/python3 scripts/serial_command.py reboot run: /usr/bin/python3 deployment/serial/serial_command.py reboot
.gitea/workflows/flash-erase.yml
+1 -1
مشاهده پرونده
@@ -13,4 +13,4 @@ jobs:
- name: Erase entire flash and verify first 256 bytes - name: Erase entire flash and verify first 256 bytes
run: | run: |
/usr/bin/python3 scripts/serial_command.py erase /usr/bin/python3 deployment/serial/serial_command.py erase
.gitea/workflows/kernel-transfer.yml
+1 -1
مشاهده پرونده
@@ -13,4 +13,4 @@ jobs:
- name: Transfer Kernel, write SPI flash and verify read-back - name: Transfer Kernel, write SPI flash and verify read-back
run: | run: |
/usr/bin/python3 scripts/serial_command.py transfer-kernel /usr/bin/python3 deployment/serial/serial_command.py transfer-kernel
.gitea/workflows/rootfs-transfer.yml
+1 -1
مشاهده پرونده
@@ -13,4 +13,4 @@ jobs:
- name: Detect flash, transfer RootFS and verify read-back - name: Detect flash, transfer RootFS and verify read-back
run: | run: |
/usr/bin/python3 scripts/serial_command.py transfer-rootfs /usr/bin/python3 deployment/serial/serial_command.py transfer-rootfs
.gitea/workflows/serial.yml
+1 -1
مشاهده پرونده
@@ -13,4 +13,4 @@ jobs:
- name: Check current U-Boot CLI prompt - name: Check current U-Boot CLI prompt
run: | run: |
/usr/bin/python3 scripts/serial_command.py check /usr/bin/python3 deployment/serial/serial_command.py check
.gitea/workflows/software-test-aminpa-V1.5.yml
+1 -1
مشاهده پرونده
@@ -27,4 +27,4 @@ jobs:
TEST_HOST_IP: ${{ vars.TEST_HOST_IP || '192.168.75.15' }} TEST_HOST_IP: ${{ vars.TEST_HOST_IP || '192.168.75.15' }}
TEST_DEVICE_IP: ${{ vars.TEST_DEVICE_IP }} TEST_DEVICE_IP: ${{ vars.TEST_DEVICE_IP }}
run: | run: |
/usr/bin/python3 scripts/software_test.py --interface "$TEST_INTERFACE" --host-ip "$TEST_HOST_IP" --device-ip "$TEST_DEVICE_IP" /usr/bin/python3 deployment/serial/software_test.py --interface "$TEST_INTERFACE" --host-ip "$TEST_HOST_IP" --device-ip "$TEST_DEVICE_IP"
.gitea/workflows/uboot-setup.yml
+1 -1
مشاهده پرونده
@@ -16,4 +16,4 @@ jobs:
UBOOT_DEVICE_IP: ${{ vars.UBOOT_DEVICE_IP || '192.168.75.100' }} UBOOT_DEVICE_IP: ${{ vars.UBOOT_DEVICE_IP || '192.168.75.100' }}
TFTP_SERVER_IP: ${{ vars.TFTP_SERVER_IP || '192.168.75.247' }} TFTP_SERVER_IP: ${{ vars.TFTP_SERVER_IP || '192.168.75.247' }}
run: | run: |
/usr/bin/python3 scripts/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP" /usr/bin/python3 deployment/serial/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP"
.gitea/workflows/uboot-transfer.yml
+1 -1
مشاهده پرونده
@@ -13,4 +13,4 @@ jobs:
- name: Transfer firmware, write SPI flash and verify read-back - name: Transfer firmware, write SPI flash and verify read-back
run: | run: |
/usr/bin/python3 scripts/serial_command.py transfer /usr/bin/python3 deployment/serial/serial_command.py transfer
README.md
+13 -2
مشاهده پرونده
@@ -21,7 +21,7 @@ workflow تنظیم شبکه و workflow اصلی فلش از آن‌ها است
نمونهٔ اجرای مستقیم: نمونهٔ اجرای مستقیم:
```bash ```bash
/usr/bin/python3 scripts/serial_command.py configure \ /usr/bin/python3 deployment/serial/serial_command.py configure \
--device-ip 192.168.75.100 \ --device-ip 192.168.75.100 \
--tftp-server-ip 192.168.75.247 --tftp-server-ip 192.168.75.247
``` ```
@@ -53,10 +53,21 @@ IP میزبان باید از قبل روی کارت شبکهٔ انتخاب‌
نمونهٔ اجرای دستی روی runner با جایگزین‌کردن IP واقعی دستگاه: نمونهٔ اجرای دستی روی runner با جایگزین‌کردن IP واقعی دستگاه:
```bash ```bash
/usr/bin/python3 scripts/software_test.py \ /usr/bin/python3 deployment/serial/software_test.py \
--interface eno1 \ --interface eno1 \
--host-ip 192.168.75.15 \ --host-ip 192.168.75.15 \
--device-ip <DEVICE_IP> --device-ip <DEVICE_IP>
``` ```
برای محل فایل‌های firmware و نقشهٔ فلش، [راهنمای firmware](firmware/README.md) را ببینید. برای محل فایل‌های firmware و نقشهٔ فلش، [راهنمای firmware](firmware/README.md) را ببینید.
## ساختار استقرار
اسکریپت‌های اجرایی در `deployment/serial/` قرار دارند:
- `serial_command.py`: کنترل U-Boot، فلش و راه‌اندازی برد از طریق سریال.
- `software_test.py`: بررسی پاسخ ping دستگاه پس از بوت.
workflowهای اصلی امین‌پرداز و ورودی‌های workflowهای کمکی در
`.gitea/workflows/` باقی می‌مانند و اسکریپت‌ها را از مسیر جدید اجرا می‌کنند.
فایل‌های باینری همچنان در پوشهٔ `firmware/` ریشهٔ مخزن قرار می‌گیرند.
scripts/serial_command.py → deployment/serial/serial_command.py
+2 -2
مشاهده پرونده
@@ -224,7 +224,7 @@ def main():
args = parser.parse_args() args = parser.parse_args()
if args.firmware is None: if args.firmware is None:
filename = "rootfs.squashfs" if args.mode == "transfer-rootfs" else "zImage" if args.mode == "transfer-kernel" else ("sun8i-v3s-licheepi-zero-dock.dtb" if args.mode == "transfer-dtb" else "u-boot-sunxi-with-spl.bin") filename = "rootfs.squashfs" if args.mode == "transfer-rootfs" else "zImage" if args.mode == "transfer-kernel" else ("sun8i-v3s-licheepi-zero-dock.dtb" if args.mode == "transfer-dtb" else "u-boot-sunxi-with-spl.bin")
args.firmware = Path(__file__).resolve().parent.parent / "firmware" / filename args.firmware = Path(__file__).resolve().parents[2] / "firmware" / filename
if args.mode in ("transfer", "transfer-dtb", "transfer-kernel", "transfer-rootfs") and not args.firmware.is_file(): if args.mode in ("transfer", "transfer-dtb", "transfer-kernel", "transfer-rootfs") and not args.firmware.is_file():
raise RuntimeError("Firmware file not found: " + str(args.firmware)) raise RuntimeError("Firmware file not found: " + str(args.firmware))
# Shared by both workflows: fail rather than interleave serial commands. # Shared by both workflows: fail rather than interleave serial commands.
@@ -250,7 +250,7 @@ def main():
files = {"uboot": "u-boot-sunxi-with-spl.bin", "dtb": "sun8i-v3s-licheepi-zero-dock.dtb", files = {"uboot": "u-boot-sunxi-with-spl.bin", "dtb": "sun8i-v3s-licheepi-zero-dock.dtb",
"kernel": "zImage", "rootfs": "rootfs.squashfs"} "kernel": "zImage", "rootfs": "rootfs.squashfs"}
for part, filename in files.items(): for part, filename in files.items():
path = Path(__file__).resolve().parent.parent / "firmware" / filename path = Path(__file__).resolve().parents[2] / "firmware" / filename
minimum = 64 if part in ("kernel", "rootfs") else 32 minimum = 64 if part in ("kernel", "rootfs") else 32
limit = LAYOUTS[capacity][part][1] limit = LAYOUTS[capacity][part][1]
if not path.is_file() or not minimum <= path.stat().st_size <= limit: if not path.is_file() or not minimum <= path.stat().st_size <= limit:
scripts/software_test.py → deployment/serial/software_test.py
مشاهده پرونده