اصلاح ورک فلو های استقرار
This commit is contained in:
@@ -38,41 +38,41 @@ jobs:
|
||||
PY
|
||||
|
||||
- name: Check current U-Boot CLI
|
||||
run: /usr/bin/python3 scripts/serial_command.py check
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py check
|
||||
|
||||
- name: Configure and verify network
|
||||
env:
|
||||
UBOOT_DEVICE_IP: ${{ vars.UBOOT_DEVICE_IP || '192.168.75.100' }}
|
||||
TFTP_SERVER_IP: ${{ vars.TFTP_SERVER_IP || '192.168.75.247' }}
|
||||
run: |
|
||||
/usr/bin/python3 scripts/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP"
|
||||
/usr/bin/python3 deployment/serial/serial_command.py configure --device-ip "$UBOOT_DEVICE_IP" --tftp-server-ip "$TFTP_SERVER_IP"
|
||||
|
||||
- name: Check all firmware sizes against detected flash layout
|
||||
run: /usr/bin/python3 scripts/serial_command.py preflight
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py preflight
|
||||
|
||||
- name: Erase detected SPI flash and verify sample
|
||||
run: /usr/bin/python3 scripts/serial_command.py erase
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py erase
|
||||
|
||||
- name: Transfer, write and verify U-Boot
|
||||
run: /usr/bin/python3 scripts/serial_command.py transfer
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py transfer
|
||||
|
||||
- name: Transfer, write and verify DTB
|
||||
run: /usr/bin/python3 scripts/serial_command.py transfer-dtb
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py transfer-dtb
|
||||
|
||||
- name: Transfer, write and verify Kernel
|
||||
run: /usr/bin/python3 scripts/serial_command.py transfer-kernel
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py transfer-kernel
|
||||
|
||||
- name: Transfer, write and verify RootFS
|
||||
run: /usr/bin/python3 scripts/serial_command.py transfer-rootfs
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py transfer-rootfs
|
||||
|
||||
- name: Inspect boot configuration
|
||||
run: /usr/bin/python3 scripts/serial_command.py boot-config
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py boot-config
|
||||
|
||||
- name: Configure and verify bootcmd for detected flash
|
||||
run: /usr/bin/python3 scripts/serial_command.py set-bootcmd
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py set-bootcmd
|
||||
|
||||
- name: Save U-Boot environment before reboot
|
||||
run: /usr/bin/python3 scripts/serial_command.py saveenv
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py saveenv
|
||||
|
||||
- name: Reboot hardware after successful flashing
|
||||
run: /usr/bin/python3 scripts/serial_command.py reboot
|
||||
run: /usr/bin/python3 deployment/serial/serial_command.py reboot
|
||||
|
||||
مرجع در شماره جدید
مسدود کردن کاربر