arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
Boot Log: -------- U-Boot SPL 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30) Trying to boot from MMC1 U-Boot 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30 +0530) CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 43C Reset cause: POR Model: Engicam GEAM6UL DRAM: 128 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 geam6ul> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Jagan Teki
committed by
Stefano Babic
Stefano Babic
parent
b8ad70f706
commit
a5b9f8c8f0
@@ -181,6 +181,16 @@ config TARGET_MX6UL_14X14_EVK
|
||||
select DM_THERMAL
|
||||
select SUPPORT_SPL
|
||||
|
||||
config TARGET_MX6UL_GEAM
|
||||
bool "Support Engicam GEAM6UL"
|
||||
select MX6UL
|
||||
select OF_CONTROL
|
||||
select DM
|
||||
select DM_GPIO
|
||||
select DM_MMC
|
||||
select DM_THERMAL
|
||||
select SUPPORT_SPL
|
||||
|
||||
config TARGET_MX6ULL_14X14_EVK
|
||||
bool "Support mx6ull_14x14_evk"
|
||||
select MX6ULL
|
||||
@@ -286,6 +296,7 @@ source "board/compulab/cm_fx6/Kconfig"
|
||||
source "board/congatec/cgtqmx6eval/Kconfig"
|
||||
source "board/el/el6x/Kconfig"
|
||||
source "board/embest/mx6boards/Kconfig"
|
||||
source "board/engicam/geam6ul/Kconfig"
|
||||
source "board/engicam/icorem6/Kconfig"
|
||||
source "board/freescale/mx6qarm2/Kconfig"
|
||||
source "board/freescale/mx6qsabreauto/Kconfig"
|
||||
|
||||
@@ -298,7 +298,8 @@ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb
|
||||
dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
|
||||
imx6sll-evk.dtb \
|
||||
imx6dl-icore.dtb \
|
||||
imx6q-icore.dtb
|
||||
imx6q-icore.dtb \
|
||||
imx6ul-geam-kit.dtb
|
||||
|
||||
dtb-$(CONFIG_MX7) += imx7-colibri.dtb
|
||||
|
||||
|
||||
@@ -0,0 +1,119 @@
|
||||
/*
|
||||
* Copyright (C) 2016 Amarula Solutions B.V.
|
||||
* Copyright (C) 2016 Engicam S.r.l.
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "imx6ul.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Engicam GEAM6UL";
|
||||
compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
|
||||
|
||||
memory {
|
||||
reg = <0x80000000 0x08000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
||||
no-1-8-v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
||||
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1: usdhc1grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
||||
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
|
||||
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
|
||||
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
||||
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
||||
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
|
||||
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
|
||||
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
|
||||
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
|
||||
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
|
||||
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
|
||||
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
|
||||
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
|
||||
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
|
||||
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
|
||||
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
|
||||
>;
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user