nearology/u-boot
1
0
Fork 0
Code Actions Activity

Use correct spelling of "U-Boot"

Browse Source 
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
This commit is contained in:
Bin Meng
2016-02-05 19:30:11 -08:00
committed by Anatolij Gustschin
parent 94985cc9d3
commit a187559e3d
318 changed files with 606 additions and 606 deletions
Download Patch File Download Diff File Expand all files Collapse all files
doc/README.mxs
+9 -9
View File
@@ -1,4 +1,4 @@
Booting U-boot on a MXS processor
Booting U-Boot on a MXS processor
=================================
This document describes the MXS U-Boot port. This document mostly covers topics
@@ -23,7 +23,7 @@ Contents
2) Compiling U-Boot for a MXS based board
3) Installation of U-Boot for a MXS based board to SD card
4) Installation of U-Boot into NAND flash on a MX28 based board
5) Installation of U-boot into SPI NOR flash on a MX28 based board
5) Installation of U-Boot into SPI NOR flash on a MX28 based board
1) Prerequisites
----------------
@@ -95,19 +95,19 @@ Next, configure U-Boot for a MXS based board
Examples:
1. For building U-boot for Denx M28EVK board:
1. For building U-Boot for Denx M28EVK board:
$ make m28evk_config
2. For building U-boot for Freescale MX28EVK board:
2. For building U-Boot for Freescale MX28EVK board:
$ make mx28evk_config
3. For building U-boot for Freescale MX23EVK board:
3. For building U-Boot for Freescale MX23EVK board:
$ make mx23evk_config
4. For building U-boot for Olimex MX23 Olinuxino board:
4. For building U-Boot for Olimex MX23 Olinuxino board:
$ make mx23_olinuxino_config
@@ -267,7 +267,7 @@ There are two possibilities when preparing an image writable to NAND flash.
5) Installation of U-Boot into SPI NOR flash on a MX28 based board
------------------------------------------------------------------
The u-boot.sb file can be directly written to SPI NOR from U-boot prompt.
The u-boot.sb file can be directly written to SPI NOR from U-Boot prompt.
Load u-boot.sb into RAM, this can be done in several ways and one way is to use
tftp:
@@ -278,7 +278,7 @@ Probe the SPI NOR flash:
(SPI NOR should be succesfully detected in this step)
Erase the blocks where U-boot binary will be written to:
Erase the blocks where U-Boot binary will be written to:
=> sf erase 0x0 0x80000
Write u-boot.sb to SPI NOR:
@@ -287,4 +287,4 @@ Write u-boot.sb to SPI NOR:
Power off the board and set the boot mode DIP switches to boot from the SPI NOR
according to MX28 manual section 12.2.1 (Table 12-2)
Last step is to power up the board and U-boot should start from SPI NOR.
Last step is to power up the board and U-Boot should start from SPI NOR.